Stone Mind Fingernails

Some sort of Stone Mind Nail designs includes super strong 1060 solidified material and has a normal toe nail head having a diamond-shaped emblem laser engraved into it. Compared to the substitute (screws) Stone Mind Fingernails usually are far more effective and economical and since dependable pertaining to a selection of building materials-particularly material.

Explanation

The actual nail-shaped nails having a ripped head are made of material wire complying using ASTM Some sort of 510, Quality 1060 (UNS 1600) and therefore are heat-treated to produce circumstance and center solidity connected with 52-55 HRC. The actual fingernails or toenails have often electrodeposited zinc films having a chromate end or even mechanically lodged zinc films complying respectively using ASTM B633 Kind II, SC 1 or even ASTM B695 Kind 1 Category 12. The actual solidified fingernails or toenails have a ballistic point having a nominal 0. 10-inch (2. 69mm) or even 0. 145-inch (3. 66mm) dimension knurled or even easy shank, a new nominal 0. 245-inch (6. 2 mm) dimension head and a bare minimum duration of 3/4 inch. They will are available in 15 level wire collated and 21 years of age level plastic collated whitening strips, and 0 level plastic coils linens.

Features and Benefits of Diamond Head Nails

• When compared to screws, Diamond Head Nails install at least 50% faster.
• Diamond Head Nails are manufactured out of 1060 hardened steel and are excellent for attaching steel-to-steel, wood-to-steel, and wood-to-cement. Mainstream nails are made with 1020-1030 steel and are limited to fastening wood-to-wood.
• Diamond Head Nails are appropriate for commercial construction, while regular nails are best for wood-framed residential construction.
• Using Diamond Head Nails, contractors and inspectors can trace the nails; they know the Diamond Head design, the manufacturer, and the necessary testing to win ICC approval.

Diamond Head Nails and Steel Construction

With the innovation of light gauge steel, new fasteners were required. The introduction of the Diamond Head Nail now allows builders to fasten OSB board, plywood, gypsum board, metal and other sidings to light gauge steel in a fraction of the time and at a fraction of the cost (screw guns vs. nail guns). Regular nails will not penetrate or hold in steel.

Thanks to the efforts of industrial groups such as The National Association of Home Builders, The American Iron and Steel Institute and the Light Gauge Steel Engineers Association the perception of light gauge steel framing of homes and high rise buildings, has rapidly evolved from that of an experimental building practice to one that offers many benefits over wood framing. Light gauge steel in conjunction with Diamond Head Nails:

• Is stronger
• Results in straighter, truer walls
• Is termite proof
• Is noncombustible
• Will never rot.

Builder Benefits

• Precision - steel is precisely manufactured; it's straight with square corners.
• Greater Design Range For all Materials---steel has the highest strength-to- weight ratio, creates a stronger, lighter-weight frame, accommodates greater spans, and allows for larger open spaces within a building.
• Long Term Price Stability - compared to lumber, the price of steel is much more stable.
• Less Waste - steel studs can be cut to exact lengths with almost no waste.
• Dimensionally Stable - there is no shrinkage, no rotting, and no warping.
• No Possibility of Insect or Mold Damage - steel is naturally termite, carpenter ant, and mold proof.
• Better Protection in Natural Disasters---steel withstands hurricanes and earthquakes better.
• Less Warranty Work - there are no nail pops or drywall cracks.

Building Owner Benefits

• Environmentally Superior - steel is non-toxic and allergy-free, with no waste, and higher recycling potential.
• Highly Durable Over the Long Haul - there are no jammed doors and windows, no out-of-plumb walls or sagging roof lines.
• Fire Safety - steel does not burn.
• Lower Insurance Premiums - because steel is fire retardant and more durable in hurricanes and earthquakes, insurance premiums are lower.

The other alternative for steel construction is screws. Using screws is very time consuming; the installation of nails is at least 50% faster. Screws are put in place one at a time with screw guns. Nails are installed with gas or air tools. Savings in worker hours is a major benefit. A recent school project saved the contractor about $9,000 in labor alone. While Diamond Head Nails are cost competitive with alternative fasteners, the major savings is in how they are installed.

B2B Industrial Packaging's Herb Burrows is the developer of the highly innovative fastener. After receiving International Code Council (ICC) code approval, Herb received the required approval from the State of California. Herb is the only person who has three ICC Code approved nails (numbers ESR2961, ESR2962, and ER3091). Herb granted B2B Industrial Packaging permission to sell these nails and use the ICC Code approval.

Michael Theriault is President and CEO of B2B Industrial Packaging LLC - B2B Industrial sells packaging products, such as banding carts, strapping carts, steel strapping, polyester banding, steel banding seals, and stretch film. They operate a banding tool repair-strapping tool repair facility at their Addison, Illinois headquarters. Visit the B2B Industrial Website: http://www.B2BInd.com.

The following is a black nail designs inspiration

Source: http://EzineArticles.com/6656654